PARIO
Tech Specs
TECHNICAL SPECIFICATIONS
Measurement Specifications
Typical Duration of Measurement
PARIO Classic: 8 h
PARIO Plus: 3 h
Particle Size
Range: 2.0000 – 63.0000 μm
Approximate Error in Mass Fraction Detection
PARIO Classic: ±3 %
PARIO Plus: ±1 %
Estimation of Clay Content
Derived from integrated particle mass in effluent
Estimation of Sand Fraction
Sand fraction estimated by sieve data
Pressure Measurement
Accuracy: ±1.0000 Pa
Resolution: ±0.1000 Pa
Typical Particle Mass
25−50 g per 1-L suspension
Communication Specifications
Physical Specifications
Cable Type
USB 2.0; 500 mA for receiving port
Glass Cylinder
Height: 450.0 mm (17.7 in)
Diameter: Inner: 59.0 mm (2.3 in)
Outer: 67.5 mm (2.7 in)
Volume: 1,000 cm³ (61.0 in³)
Material: Borosilicate glass 3.3
PARIO Device
Height: 293.0 mm (9.1 in)
Diameter: 80.0 mm (3.2 in)
Material: Polyoxymethylene plastic (POM) and stainless steel
Maximum Tolerable Temperature Change During Measurement
Required External Measurement
PARIO Classic: Content of organic matter (if OC is destroyed)
Sand fractions (from wet sieving)
Mass of dispersion salt in total suspension volume
PARIO Plus: Mass of dry matter in discharged subsample
Sand fractions (from wet sieving)
Mass of dispersion salt in total suspension volume
Operating Temperature Range
Minimum: 15.00 °C
Typical: 20.00 °C
Maximum: 35.00 °C
Other
Other Compatible Software
PARIO result files are compatible with the interface of LASTRADA laboratory software (Sieving and Sedimentation module)
Compliance
EM ISO/IEC 17050:2010 (CE Mark)
Request a quote
Fill out the form below to help us pair you with the right expert. We’ll prepare the information you request, then contact you as soon as possible.